Three Analog Outputs

• Selectable for 0 to 20 mA, 4 to 20 mA, and 0 to 10 Volts
• Analog Output – The X96S offers three analog outputs. Two are 10 millisecond update rates and are customer selectable; the third is for temperature output and occurs on a longer scan rate basis. Digital Outputs – Alarm Capability
• Alarm for system failure that can be tied back into the Controller Start Cast output (TTL logic signal). This output is used to queue the system to start the motors.
• Digital output (TTL logic signal) to signal the system that the X96S is in a calibration cycle.
• Digital Inputs – Two digital (TTL level) inputs: one each for High/Low Auto-Calibrate. Five Digital Relays and Five Digital TTL Outputs
• Including one fast TTL and one fast Relay (Assignable)
• High level Alarm
• Low level Alarm
• Auto Calibration Low
• High Detector Temperature
• Start Cast (Fast TTL)
• Detector Fail Alarms
• System Fail Alarms Two Selectable Detector Inputs
• For detector type (Scintillator/Ion)
• For detector head temperature Two Digital Inputs
• For remote Auto Calibration. Single Remote Push-Button contact
• For remote Auto Calibration. Single Remote Push-Button contact Two Isolated Filters with the ability to change the filter variables without upsetting the level. (Bump-less)
• Typically used for control
• Typically used for tuning or display Communications
• HART
• Profibus (Pending – 2006)
• Fieldbus (Pending – 2006)